66492e819d31d

66492e819d7d4
2 Guests are here.
 

Topic: SS2 Straylight ADaOB v0.3.0
Page: « 1 ... 6 [7] 8 ... 35 »
Read 520605 times  

Re: SS2 Straylight ADaoB v0.3.0
66492e819dd5b
Yeah, I started a new game, but the problem still exists.  I will try running ADaoB by itself (with a new save, of course) later to see if the lag still appears.
Re: SS2 Straylight ADaoB v0.3.0
66492e819dedf
hi guys
great forum an dreally amazing work on the mods - quick question here - have shock installed mod ready im running adaob with rebirth and a few weapon replacement mods, anyway no problems but when i try to run SHTUP ss2 modmanager is reporting potential conflicts with adaob.. anyone else get this and if so is it ok to go ahead and just run it ?
cheers

66492e819e03dZylonBane

Re: SS2 Straylight ADaoB v0.3.0
66492e819e093
You're supposed to install SHTUP first. Always, always, ALWAYS install SHTUP first.
Re: SS2 Straylight ADaoB v0.3.0
66492e819e1c2
actually with your ;'always.always,always ' bullshit i found the following post on ttlg forums :
' Yes, ADaOB includes a small number of files that are also in SHTUP, ergo they "conflict". You can safely ignore the warning.'
posted by another board member on here.
show some manners when someone politely asks a question.

66492e819e2c0miracle.flame

Re: SS2 Straylight ADaoB v0.3.0
66492e819e30d
And why do you expect others to behave just as you imagine? Quite childish don't you think?

BTW, Always, always, ALWAYS install ADaoB last.

66492e819e3a9ZylonBane

Re: SS2 Straylight ADaoB v0.3.0
66492e819e3f7
I wish I could be there to witness matt's utter mental breakdown when he first encounters actual rude behavior on the internet.
Re: SS2 Straylight ADaoB v0.3.0
66492e819e4e6
thanks for the input lads ! have a good one.
matt.

66492e819e5faNameless Voice

Re: SS2 Straylight ADaoB v0.3.0
66492e819e646
Always, always, ALWAYS install SHTUP first.
Personally I keep it in its own resource path so that it gets loaded after mod contents but before the original game resources.

66492e819e8f8ZylonBane

Re: SS2 Straylight ADaoB v0.3.0
66492e819e94e
Personally I keep it in its own resource path so that it gets loaded after mod contents but before the original game resources.
Wait... shouldn't it load after the original game resources, but before other mod content? Or am I misinterpreting?

Priority chain should be:
original assets <- lowest
SHTUP
other mods <- highest

66492e819e9fdNameless Voice

Re: SS2 Straylight ADaoB v0.3.0
66492e819ea52
Er, I meant "gets searched" not "gets loaded".  So SHTUP content will only be used if the file doesn't exist from a mod.
Re: SS2 Straylight ADaoB v0.3.0
66492e819ec2b
Please excuse me if this issue was already addressed, but I'm experiencing a problem when using ADaoB. ( Installed it using the latest mod manager for future reference. )

The problem exists when I go into the training area and grab a laser pistol. ( I have yet to know if this also applies when using the laser pistol in other areas. ) When I fire in Over shot mode, change to Normal, and try to fire again while the weapon is still cooling down, it attempts to fire, uses no energy, and leaves a piece of blue laser sitting in the room that doesn't go away until I leave the map.

When I first tried SS2 with ADaoB awhile back, I'm sure that I had this same problem, but afterwards it....fixed itself? I don't know what I did, but the laser stopped trying to fire when it was cooling down after an Over shot, which I'm sure is what was meant to happen.

I'd really like help with this. I attempted to load up the mods in a different order and disable certain weapon mods to see if any fixes would occur, but all in vain. It's very annoying to have floating hunks of laser cluttered around your breathing space. =[

Edit: Apparently, when I deactivated all my mods, reran SS2Tool, and reactivated my mods, the error is worse. This huge green blob appears on the screen that causes graphics to smear ( like dragging my mouse pointer over it leaves an undieing trail ) and doesn't let me move.
Re: SS2 Straylight ADaoB v0.3.0
66492e819edb8
http://www.filedropper.com/screenshot1_2

This is what my new offender Mr Green Blob looks like. I actually had one time when firing the laser teleported me way up into the sky only for me to fall back down to my death, and immediately doing another new game before exiting SS2 actually had the laser pistol working correctly. ( It would make a clicking sound until the cool down was complete. ) Of course though, quiting and reentering the game had the green blob effect all over again.

66492e819f1faAccessViolation

Re: SS2 Straylight ADaoB v0.3.0
66492e819f24f
The problem exists when I go into the training area and grab a laser pistol. ( I have yet to know if this also applies when using the laser pistol in other areas. ) When I fire in Over shot mode, change to Normal, and try to fire again while the weapon is still cooling down, it attempts to fire, uses no energy, and leaves a piece of blue laser sitting in the room that doesn't go away until I leave the map.

As a reference, I've had the same problem with attempting to re-fire while the gun is charging. One or more of the following things happens (very rarely):
1.) The weapon disappears from my "hand". It can still be fired, but no longer appears on-screen.
2.) The "piece of blue laser" appears where I fired the gun and (in my case) never disappears. It's a ~6" tall cylinder sitting in mid-air where I fired from.
3.) The weapon charge reduces to some incredibly low negative number (-25689509) which can only be fixed by recharging the gun.

All of these have occurred when I've attempted to re-fire while the gun was recovering from an "Over" shot.

66492e819f30bNameless Voice

Re: SS2 Straylight ADaoB v0.3.0
66492e819f364
Simple solution: don't try to "cheat" by firing again before the gun has cooled down. ;)

I'll look into this at some point.

66492e819f642AccessViolation

Re: SS2 Straylight ADaoB v0.3.0
66492e819f6a5
Simple solution: don't try to "cheat" by firing again before the gun has cooled down. ;)
Believe it or not, that was my reaction the first time it happened (#1 and #3 simultaneously). I was cornered and in a panic and tried the old "exploit" of firing an Overshot and then cycling through Norm and back to Over to fire another before the gun had cooled down. Since then, I've just made sure I always had a close-combat weapon ready. But, the #2 cylinder bug has occurred twice after I gave up "exploiting" the gun (old habits die hard) anyway.

None of it is game-breaking, and I viewed the negative charge bug as another way of the gun "jamming" (at the worst possible moment, of course). Thanks for the work (amongst others) on this mod!
Re: SS2 Straylight ADaoB v0.3.0
66492e819f96a
Simple solution: don't try to "cheat" by firing again before the gun has cooled down. ;)

I'll look into this at some point.

Heh, for the most part I don't, but I know sometimes I'll enter Access's situation or maybe just try to shoot a normal shot too quickly before the cool down is complete, and it wouldn't be very good to have some glitch come up forcing my progress to be lost.

But as it was said, it's really a quirk more than anything game-breaking, especially since reinstalling the entire game along with the mods finally removed the blob and got the floating hunks of laser back.

The mod is great otherwise. ;] For whatever reason, it's also the only way I can play the original game too since it doesn't load up unmodded on my current laptop; go figure.

66492e819fa25Nameless Voice

Re: SS2 Straylight ADaoB v0.3.0
66492e819fa73
As for firing overcharge shots faster: the best way to work around that is to carry multiple laser pistols and swap between them after each shot, allowing you to fire faster than a single gun can cool down.

66492e819fca8AccessViolation

Re: SS2 Straylight ADaoB v0.3.0
66492e819fd35
As for firing overcharge shots faster: the best way to work around that is to carry multiple laser pistols and swap between them after each shot.

I do that: carrying up to three early-on when ammunition is scarce and the pistols have a small capacity. It's just always been that my button to switch firing modes is more accessible than the #5 button to swap guns. The game also doesn't swap to the gun with the most ammo (or possibly the best modifications), so if I've been away from a charger for any length of time, I sometimes end up quick-drawing a weapon with an empty clip.

66492e819fdf1Nameless Voice

Re: SS2 Straylight ADaoB v0.3.0
66492e819fe40
This ought to fix the bug.  Just drop this version of NVScript.osm in over the one that comes with ADaOB.

[Attachment expired.]
« Last Edit: 19. February 2016, 02:15:56 by Nameless Voice »

66492e819feefZylonBane

Re: SS2 Straylight ADaoB v0.3.0
66492e819ff3d
It would be a great little addition if we could make it so that the old overload/normal/overload trick still worked, but damaged the gun. More resource-management decisions are always fun. :)

66492e819ffe9Nameless Voice

Re: SS2 Straylight ADaoB v0.3.0
66492e81a0037
IIRC actually made normal shots damage the gun far less than overcharge shots (originally, both did the same damage to the gun, which was rather unfair.)
Re: SS2 Straylight ADaoB v0.3.0
66492e81a0164
Crashing bug?

I am getting a lot of crashes.  Usually what happens is that I press 'u' to play an unheard log, and then there is a huge shower of ammo casings that fall on the floor.  The game then gets a little choppy and a few minutes later it crashes.

I am thinking it's ADoaB since it added the shell casings.

Has anyone seen something like this?
Re: SS2 Straylight ADaoB v0.3.0
66492e81a02c6
Well what other mods do you have installed?
Re: SS2 Straylight ADaoB v0.3.0
66492e81a03eb
Here's what I did:
1.) Installed SS2 game from Disk
2.) Installed SS2Tool, used all patches including DDFix and Widescreen mod.
3.) Installed SHTUP
4.) Installed Rebirth
5.) Installed ADoaB
6.) Installed Tactitools weapon replacements, including the ADoaB compatible pistol

I am using Win7 Beta.

Your name:
This box must be left blank:

____ at you, hacker: a pathetic creature of meat and bone!  (Fill in the missing word):
2 Guests are here.
Thank you for your patience.
Contact SMF 2.0.19 | SMF © 2016, Simple Machines | Terms and Policies
FEEP
66492e81a0535