66492ea8c3e1d

66492ea8c42f6
1 Guest is here.
 

Topic: SS2 Straylight ADaOB v0.3.0
Page: « 1 ... 6 [7] 8 ... 35 »
Read 520608 times  

Re: SS2 Straylight ADaoB v0.3.0
66492ea8c48bc
Yeah, I started a new game, but the problem still exists.  I will try running ADaoB by itself (with a new save, of course) later to see if the lag still appears.
Re: SS2 Straylight ADaoB v0.3.0
66492ea8c49e9
hi guys
great forum an dreally amazing work on the mods - quick question here - have shock installed mod ready im running adaob with rebirth and a few weapon replacement mods, anyway no problems but when i try to run SHTUP ss2 modmanager is reporting potential conflicts with adaob.. anyone else get this and if so is it ok to go ahead and just run it ?
cheers

66492ea8c4b30ZylonBane

Re: SS2 Straylight ADaoB v0.3.0
66492ea8c4b7e
You're supposed to install SHTUP first. Always, always, ALWAYS install SHTUP first.
Re: SS2 Straylight ADaoB v0.3.0
66492ea8c4c89
actually with your ;'always.always,always ' bullshit i found the following post on ttlg forums :
' Yes, ADaOB includes a small number of files that are also in SHTUP, ergo they "conflict". You can safely ignore the warning.'
posted by another board member on here.
show some manners when someone politely asks a question.

66492ea8c4d7fmiracle.flame

Re: SS2 Straylight ADaoB v0.3.0
66492ea8c4dd3
And why do you expect others to behave just as you imagine? Quite childish don't you think?

BTW, Always, always, ALWAYS install ADaoB last.

66492ea8c4ecaZylonBane

Re: SS2 Straylight ADaoB v0.3.0
66492ea8c4f24
I wish I could be there to witness matt's utter mental breakdown when he first encounters actual rude behavior on the internet.
Re: SS2 Straylight ADaoB v0.3.0
66492ea8c5022
thanks for the input lads ! have a good one.
matt.

66492ea8c512dNameless Voice

Re: SS2 Straylight ADaoB v0.3.0
66492ea8c517e
Always, always, ALWAYS install SHTUP first.
Personally I keep it in its own resource path so that it gets loaded after mod contents but before the original game resources.

66492ea8c548dZylonBane

Re: SS2 Straylight ADaoB v0.3.0
66492ea8c54e3
Personally I keep it in its own resource path so that it gets loaded after mod contents but before the original game resources.
Wait... shouldn't it load after the original game resources, but before other mod content? Or am I misinterpreting?

Priority chain should be:
original assets <- lowest
SHTUP
other mods <- highest

66492ea8c5597Nameless Voice

Re: SS2 Straylight ADaoB v0.3.0
66492ea8c55f6
Er, I meant "gets searched" not "gets loaded".  So SHTUP content will only be used if the file doesn't exist from a mod.
Re: SS2 Straylight ADaoB v0.3.0
66492ea8c5823
Please excuse me if this issue was already addressed, but I'm experiencing a problem when using ADaoB. ( Installed it using the latest mod manager for future reference. )

The problem exists when I go into the training area and grab a laser pistol. ( I have yet to know if this also applies when using the laser pistol in other areas. ) When I fire in Over shot mode, change to Normal, and try to fire again while the weapon is still cooling down, it attempts to fire, uses no energy, and leaves a piece of blue laser sitting in the room that doesn't go away until I leave the map.

When I first tried SS2 with ADaoB awhile back, I'm sure that I had this same problem, but afterwards it....fixed itself? I don't know what I did, but the laser stopped trying to fire when it was cooling down after an Over shot, which I'm sure is what was meant to happen.

I'd really like help with this. I attempted to load up the mods in a different order and disable certain weapon mods to see if any fixes would occur, but all in vain. It's very annoying to have floating hunks of laser cluttered around your breathing space. =[

Edit: Apparently, when I deactivated all my mods, reran SS2Tool, and reactivated my mods, the error is worse. This huge green blob appears on the screen that causes graphics to smear ( like dragging my mouse pointer over it leaves an undieing trail ) and doesn't let me move.
Re: SS2 Straylight ADaoB v0.3.0
66492ea8c5977
http://www.filedropper.com/screenshot1_2

This is what my new offender Mr Green Blob looks like. I actually had one time when firing the laser teleported me way up into the sky only for me to fall back down to my death, and immediately doing another new game before exiting SS2 actually had the laser pistol working correctly. ( It would make a clicking sound until the cool down was complete. ) Of course though, quiting and reentering the game had the green blob effect all over again.

66492ea8c5cecAccessViolation

Re: SS2 Straylight ADaoB v0.3.0
66492ea8c5d3f
The problem exists when I go into the training area and grab a laser pistol. ( I have yet to know if this also applies when using the laser pistol in other areas. ) When I fire in Over shot mode, change to Normal, and try to fire again while the weapon is still cooling down, it attempts to fire, uses no energy, and leaves a piece of blue laser sitting in the room that doesn't go away until I leave the map.

As a reference, I've had the same problem with attempting to re-fire while the gun is charging. One or more of the following things happens (very rarely):
1.) The weapon disappears from my "hand". It can still be fired, but no longer appears on-screen.
2.) The "piece of blue laser" appears where I fired the gun and (in my case) never disappears. It's a ~6" tall cylinder sitting in mid-air where I fired from.
3.) The weapon charge reduces to some incredibly low negative number (-25689509) which can only be fixed by recharging the gun.

All of these have occurred when I've attempted to re-fire while the gun was recovering from an "Over" shot.

66492ea8c5decNameless Voice

Re: SS2 Straylight ADaoB v0.3.0
66492ea8c5e4d
Simple solution: don't try to "cheat" by firing again before the gun has cooled down. ;)

I'll look into this at some point.

66492ea8c60c8AccessViolation

Re: SS2 Straylight ADaoB v0.3.0
66492ea8c611a
Simple solution: don't try to "cheat" by firing again before the gun has cooled down. ;)
Believe it or not, that was my reaction the first time it happened (#1 and #3 simultaneously). I was cornered and in a panic and tried the old "exploit" of firing an Overshot and then cycling through Norm and back to Over to fire another before the gun had cooled down. Since then, I've just made sure I always had a close-combat weapon ready. But, the #2 cylinder bug has occurred twice after I gave up "exploiting" the gun (old habits die hard) anyway.

None of it is game-breaking, and I viewed the negative charge bug as another way of the gun "jamming" (at the worst possible moment, of course). Thanks for the work (amongst others) on this mod!
Re: SS2 Straylight ADaoB v0.3.0
66492ea8c6388
Simple solution: don't try to "cheat" by firing again before the gun has cooled down. ;)

I'll look into this at some point.

Heh, for the most part I don't, but I know sometimes I'll enter Access's situation or maybe just try to shoot a normal shot too quickly before the cool down is complete, and it wouldn't be very good to have some glitch come up forcing my progress to be lost.

But as it was said, it's really a quirk more than anything game-breaking, especially since reinstalling the entire game along with the mods finally removed the blob and got the floating hunks of laser back.

The mod is great otherwise. ;] For whatever reason, it's also the only way I can play the original game too since it doesn't load up unmodded on my current laptop; go figure.

66492ea8c6438Nameless Voice

Re: SS2 Straylight ADaoB v0.3.0
66492ea8c6485
As for firing overcharge shots faster: the best way to work around that is to carry multiple laser pistols and swap between them after each shot, allowing you to fire faster than a single gun can cool down.

66492ea8c6686AccessViolation

Re: SS2 Straylight ADaoB v0.3.0
66492ea8c66dd
As for firing overcharge shots faster: the best way to work around that is to carry multiple laser pistols and swap between them after each shot.

I do that: carrying up to three early-on when ammunition is scarce and the pistols have a small capacity. It's just always been that my button to switch firing modes is more accessible than the #5 button to swap guns. The game also doesn't swap to the gun with the most ammo (or possibly the best modifications), so if I've been away from a charger for any length of time, I sometimes end up quick-drawing a weapon with an empty clip.

66492ea8c679aNameless Voice

Re: SS2 Straylight ADaoB v0.3.0
66492ea8c67e7
This ought to fix the bug.  Just drop this version of NVScript.osm in over the one that comes with ADaOB.

[Attachment expired.]
« Last Edit: 19. February 2016, 02:15:56 by Nameless Voice »

66492ea8c6895ZylonBane

Re: SS2 Straylight ADaoB v0.3.0
66492ea8c68e0
It would be a great little addition if we could make it so that the old overload/normal/overload trick still worked, but damaged the gun. More resource-management decisions are always fun. :)

66492ea8c697aNameless Voice

Re: SS2 Straylight ADaoB v0.3.0
66492ea8c69c5
IIRC actually made normal shots damage the gun far less than overcharge shots (originally, both did the same damage to the gun, which was rather unfair.)
Re: SS2 Straylight ADaoB v0.3.0
66492ea8c6ad4
Crashing bug?

I am getting a lot of crashes.  Usually what happens is that I press 'u' to play an unheard log, and then there is a huge shower of ammo casings that fall on the floor.  The game then gets a little choppy and a few minutes later it crashes.

I am thinking it's ADoaB since it added the shell casings.

Has anyone seen something like this?
Re: SS2 Straylight ADaoB v0.3.0
66492ea8c6c62
Well what other mods do you have installed?
Re: SS2 Straylight ADaoB v0.3.0
66492ea8c6d87
Here's what I did:
1.) Installed SS2 game from Disk
2.) Installed SS2Tool, used all patches including DDFix and Widescreen mod.
3.) Installed SHTUP
4.) Installed Rebirth
5.) Installed ADoaB
6.) Installed Tactitools weapon replacements, including the ADoaB compatible pistol

I am using Win7 Beta.

Your name:
This box must be left blank:

How can you ____ a perfect, immortal machine? (Fill in the missing word):
1 Guest is here.
Thank you for your patience.
Contact SMF 2.0.19 | SMF © 2016, Simple Machines | Terms and Policies
FEEP
66492ea8c6eb6