664a45614e75d

664a45614ed98
2 Guests are here.
 

Topic: SS2 TF's Secmod 3
Page: « 1 [2] 3 ... 46 »
Read 135281 times  

664a45614f63fThiefsieFool

664a45614f6b9
Only two spots, MedSci2 which you know about and Hydro3.

664a45614f892voodoo47

664a45614f8fe
if that's the case, the conflict on medsci2 should be the only one. drop the attached dml into Secmod root (where the maps are), and voila, you are compatible.

'till another problem is found, that is - someone really should run through Secmod with the ss2tool 6.0 dml pack active to make sure there are no show stoppers. the chances are really small, but still.


//for anyone that might be downloading this and adding it to the Secmod install manually, remember that you need to add it before you enter medsci2 for the first time.
« Last Edit: 25. October 2014, 22:46:39 by voodoo47 »

664a45614f9eaThiefsieFool

664a45614fa42
Thanks a lot, having all the DML fixes will be really nice, I guess I'll do the test run with all the DMLs active if someone doesn't get there first.

664a45614fd80Nameless Voice

664a45614fddc
Wouldn't SecMod3 just need nvscript.osm then?

And while we're on this, wouldn't it be best to distribute nvscript.osm centrally?

SecMod already uses NVScript.

In the early days of scripts, the modules were distributed centrally and not included in (Thief) FMs.  It lead to too many people wondering why the missions didn't work because they didn't bother to get the latest version of the script module.
It especially wouldn't be viable for something like NVScript which is updated every time someone needs something new.  Often with the same version numbers!  And rarely publicly released!

664a45615008aremyabel

664a4561500f6
if that's the case, the conflict on medsci2 should be the only one. drop the attached dml into Secmod root (where the maps are), and voila, you are compatible.

'till another problem is found, that is - someone really should run through Secmod with the ss2tool 6.0 dml pack active to make sure there are no show stoppers. the chances are really small, but still.


//for anyone that might be downloading this and adding it to the Secmod install manually, remember that you need to add it before you enter medsci2 for the first time.

Can't even get to that part. I did a refresh install with ss2tool 6.0.0.5 and it has a black screen (with sound) as soon as you enter one of the career paths.

664a4561501cfvoodoo47

664a45615022c
to rule out dml issues, rename the misdml folder in your SS2 folder and start a new game.

I did not have any issues going through that part, and the dmls there have pretty much zero potential of doing something like that, as they just flip some lights around and fix some scripts.

but before you do anything, make a save with the screen being black and post it here.

664a4561504a5remyabel

664a456150500
to rule out dml issues, rename the misdml folder in your SS2 folder and start a new game.

I did not have any issues going through that part, and the dmls there have pretty much zero potential of doing something like that, as they just flip some lights around and fix some scripts.

but before you do anything, make a save with the screen being black and post it here.

Yes, I doubt that it was the dml that caused the issue. I just neglected to mention it before because I thought saying it didn't work with ss2tool 6 would be superfluous. Here's the save.
[save_0.7z expired]
664a456150da8
Huh, no problem going through the career with SS2Tool beta 6.0.0.5 and Secmod3 here.
Since you mentioned a refresh install, I assume you also chose the Clean Install option in SS2Tool?

664a456150fa7remyabel

664a456151003
Huh, no problem going through the career with SS2Tool beta 6.0.0.5 and Secmod3 here.
Since you mentioned a refresh install, I assume you also chose the Clean Install option in SS2Tool?

Yes.
664a4561510f1
Could you send me your ss2tool.log file in a PM?
664a456151411
Thanks for the feedback, guys, will make a proper new thread as soon as some bugs are ironed out.
Here's a patch that should solve a) vanishing battery b) clipping wrench
bug:
Image: http://www.kachalka.com/images/01xhzrpge3nd62392d4g.png
Image: http://www.kachalka.com/images/2v3hdfpzy4a2e77t7jw.png
Image: http://www.kachalka.com/images/hyhlhx0ykry9necut7.png
664a456151543
ThiefsieFool NewHack+SECMOD3 You can combine two mode?

664a45615160eThiefsieFool

664a45615165e
The wrench shouldn't clip anymore with the patch, at least I can't get it to clip anymore, even when loading old savegames.
I checked it out but another hack type isn't really necessary, you have wire puzzles after all.
Acknowledged by: remyabel

664a456151773remyabel

664a4561517dc
Just noticed these two terminals seem to be a little "off"

Also, this is rather contrived but here the wrench still clips (the terrain doesn't clip anymore though) (see clip2.png). It seems the "last stage" of bloodiness still clips. Before that, the wrench doesn't clip.

Minor complaint: Hacking mini game doeesn't display fully in resolutions smaller than 1024x768.
[clip2.png expired]
[clip.png expired]
[off.png expired]
« Last Edit: 26. October 2014, 10:07:42 by remyabel »

664a456151906ThiefsieFool

664a456151968
Did I move those terminals? I can't remember.

EDIT: That's really strange that you still get clipping, are you sure that the original WRENCH_H3.BIN file got replaced with the one from the patch archive?
« Last Edit: 26. October 2014, 10:12:18 by ThiefsieFool »

664a456151bf3remyabel

664a456151c4a
Did I move those terminals? I can't remember.

EDIT: That's really strange that you still get clipping, are you sure that the original WRENCH_H3.BIN file got replaced with the one from the patch archive?

Yeah, I did a manual replace just to be sure.
[megaclip.png expired]
[minor clip.png expired]

664a456151d48voodoo47

664a456151d9d
about that save, it spawns me outside the level, no idea how that could have happened, but definitely not a dml problem.

ok, I think I know what the problem is, the Station level needs to be reprocessed, looks like it has been saved in the draft mode (that's why the doors are so weirdly blackish, for example). attaching a reprocessed level, try it and see whether it will bug out or not (start a new game).
[STATION_secmod.7z expired]
664a4561520ad
Can't even get to that part. I did a refresh install with ss2tool 6.0.0.5 and it has a black screen (with sound) as soon as you enter one of the career paths.

I got your log file. Your game was not actually updated. (Sorry, my fault.) Let's continue this in the SS2Tool beta thread.
664a456152334
about that save, it spawns me outside the level, no idea how that could have happened, but definitely not a dml problem.

ok, I think I know what the problem is, the Station level needs to be reprocessed, looks like it has been saved in the draft mode (that's why the doors are so weirdly blackish, for example). attaching a reprocessed level, try it and see whether it will bug out or not (start a new game).
norm

664a456152743remyabel

664a456152798
Gotta say I love the sharpshooter OS upgrade. Wonder if it's possible to gib the hybrids, i.e with a shotgun head blast or randomly with the pistol. It'd be reminiscent of the classic resident evils.

664a456152861ThiefsieFool

664a4561528ae
Thanks for the pics, System, looks like I forgot to include some FAM textures.

I actually forgot to brag about this new feature, headshots are implemented with the Weak Point receptron but you need to have Sharpshooter to perform them, glad you like 'em remyabel and yeah there's gibbing galore at high skill.
« Last Edit: 27. October 2014, 12:39:28 by ThiefsieFool »

664a456152b4eSystem Shocked

664a456152bae
I actually forgot to brag about this new feature, headshots are implemented with the Weak Point receptron but you need to have Sharpshooter to perform them, glad you like 'em remyabel and yeah there's gibbing galore at high skill.

I'm sure the community at large would love to have the "gibbing galore" available as a separate mod, if doable.

No doubt it'd quickly become a favorite and top downloader.

Your name:
This box must be left blank:

Name the default melee weapon in System Shock:
2 Guests are here.
+_+ :/
Contact SMF 2.0.19 | SMF © 2016, Simple Machines | Terms and Policies
FEEP
664a456152eea